Documented specifications
Snom · Listed in the current M-Series catalogue at review; exact regional availability, approved firmware, replacement battery supply and remaining support period not established.
| Specification | Documented value |
|---|---|
| Enclosure | IP65 listed; 2 m drop test stated by manufacturer Source ↗ |
| Surface | Antibacterial housing tested to JIS-Z2801; manufacturer says it does not prevent viruses Source ↗ |
| Display | 2-inch 240 × 320 color LCD Source ↗ |
| Headsets | Bluetooth LE and 3.5 mm wired connection Source ↗ |
| Battery | Up to 12 h wideband, 17 h narrowband talk; about 200 h standby Source ↗ |
| Call handling | Two simultaneous calls with a compatible base Source ↗ |
| Alerts | Top alarm key, sensors and vibration alarm listed Source ↗ |
| Audio | Wideband voice, speakerphone and hearing-aid compatibility listed Source ↗ |
| DECT regions | 1880–1900 MHz EU; 1920–1930 MHz US Source ↗ |
Unlisted fields remain unverified. Platform compatibility and remaining support life require confirmation for the exact ordered model.
Treat the protection claims narrowly
Snom lists an IP65 enclosure, a two-metre drop test and an antibacterial housing tested to JIS-Z2801. The same product page explicitly clarifies that antibacterial treatment prevents some, not all, bacteria from surviving and does not prevent viruses. These statements do not certify a cleaning protocol, infection-control outcome or suitability for every disinfectant.
Match the site’s approved cleaning procedure, exposure conditions and replacement criteria to manufacturer guidance. Inspect seals, casing and charger after drops or chemical exposure instead of assuming the original rating remains unchanged.
Do not turn the alarm key into a safety promise
The M90 includes a programmable alarm key, sensors and a vibration alert. Those controls can initiate configured calling behavior, but the product page does not establish a monitored nurse-call, lone-worker or life-safety certification. Define the destination, escalation, supervision and fallback separately.
Test the alarm workflow from every intended coverage area and during a PBX or network fault. A successful ordinary voice call is not an acceptance test for an emergency-response process.
Plan the handset and base as one system
The M90 depends on a compatible Snom M-Series base. Confirm the regional DECT variant, enrollment limit, per-base calls, roaming design and PBX provisioning together. The handset specification lists two simultaneous calls, but system capacity remains constrained by the base and active codec.
Pilot answer, hold, attended and blind transfer, headset use, roaming and recovery after a battery or handset restart. Record the exact base and handset firmware with the result.
Verify accessories and lifecycle
The manufacturer documents Bluetooth LE and a 3.5 mm headset jack. Test the exact headset, call controls, audio level and reconnection rather than inferring compatibility from the connector alone. Confirm charger availability, battery replacement policy and cleaning compatibility for the planned service life.
Obtain current price, inventory and support dates from an authorized regional source. No hands-on durability, hygiene, alarm, headset, battery or PBX-interoperation result is claimed here.
Sources & applicability
Primary references for the technical details above. Operational examples and planning checklists are VoIP.info editorial guidance.
- Snom M90 manufacturer specifications and documentation ↗
- Snom M-Series product family ↗
- Snom firmware and support resources ↗
Examples require adaptation to your topology. No live PBX or hardware testing is claimed.